EUROPA LITE® New Specification

The new EUROPA LITE® Suitable for continuous flue gas temperatures up to 600°C (T600) and positive pressure applications up to 5000 Pa (H1), Manufactured using a 316L Stainless inner and a 304 outer skin EUROPA LITE® is available in twelve internal diameters ranging from 100mm to 600mm.

Utilising a mating flanged joint design with a location spigot for easy alignment during installation. The joint is secured with a Vee Band and either high or low-temperature sealant is applied on the faces of the flange and around the internal circumference of the Vee channel an insulation blanket is fitted around the joint, covered with a channel band.

EUROPA®

EUROPA® Available diameters from 100 ID through to 1200 ID. Manufactured using a 1mm thick 316L stainless steel inner to 1000 ID and 1.2mm on the largest diameters all with 304 Stainless steel outer casings, Standard annulus being 25mm with options for 50 and 100mm should the application demand.

Tested by the Loss Prevention Council achieving a 4-hour fire resistance in accordance with the stability and integrity criteria of BS 476 Part 24 Duct Type B.

EUROPA PLUS®

EUROPA PLUS® is manufactured in diameters from 100 ID through to 600 ID. Constructed using a 0.6mm thick 316L Stainless steel inner and a 304 Stainless steel outer casing.

Standard annulus is 25mm Insulfrax 128Kg/m3 AES high-density blanket with optional 50 and 100mm should the application demand.

System flange joints are sealed with the use of composite graphite gaskets and U bands, giving robust long-lived service.

Tested and assessed by the Building Research Establishment (BRE) offering a 4 hour fire resistance in accordance with the integrity criteria of BS 476 Part 20.

https://www.sflchimneys.com/brand/europa/